An advertising banner is the cheapest way to get a large ad space outdoors - on a construction site fence, a building facade, a sports ground fence or scaffolding. Whether a banner lasts one season or three years comes down to the material and the finishing. In this guide we compare 510 g PVC, mesh and blockout, explain when each works best, and show how to prepare a file for large-format printing so your artwork stays sharp from several metres away. If you're looking for banner printing in Poland, this is what you should know before ordering.
What an advertising banner is and what it's printed on
An advertising banner is a flexible large-format print on a textile or vinyl (PVC) substrate, designed to hang outdoors or indoors. It's printed using solvent, eco-solvent or UV technology - the inks penetrate the material and resist rain and UV light. Unlike a poster (paper) or a sign board (rigid panel), a banner rolls up, is light and cheap to transport, but needs a mounting system.
The three most common materials are: PVC frontlit (the most popular, 440–650 g/m²), mesh (perforated, lets wind through) and blockout (double-layer, opaque, for double-sided banners). The right choice depends on where it's mounted, how exposed it is to wind, and whether the banner will be seen from one side or both.
510 g PVC frontlit - the all-round standard
PVC frontlit is a solid, coated vinyl fabric with no perforation, so coverage is full and colours are rich. 510 g/m² is the sweet spot: strong enough for wind at typical sizes (up to about 6 m²) while staying light and affordable. It's the first-choice material for fence banners, welcome banners, shopfront facade ads or balcony banners.
Thinner PVC (440 g) is cheaper, but handles tension at the eyelets less well and ripples sooner. Heavier PVC (650–700 g) is for long-term banners, very large formats and very windy spots. For 90% of uses 510 g is optimal - which is why it's our default material.
Mesh - when wind is the problem
Mesh is PVC with regular perforation (typically around 30–40% open area) that lets wind pass through. This means the banner doesn't act like a sail - it doesn't catch wind load and won't tear off its fixings or the structure. It's a must for scaffolding, tall facades, stadium fences and anywhere the area is large (tens of m²) or the banner is mounted high up.
The downside of mesh is exactly that perforation: small text and thin lines lose sharpness, and the background shows through (you can see what's behind the banner). So design big, simple messages for mesh - logo, slogan, phone number - with no small print.
Blockout - double-sided banners
Blockout is a three-layer material with a black light-blocking layer in the middle. Thanks to it, the two sides of the banner don't show through each other - you can print different artwork on each side (e.g. two different offers), and passers-by on either side see a sharp, opaque image. Blockout is used for banners hung across streets, on poles, and for ads visible from two directions of traffic. The same material (200 g blockout) is used for the prints in our roll-up banners.
Banner materials compared
| Material | Weight | Coverage | Wind resistance | Typical use |
|---|---|---|---|---|
| PVC frontlit | 440–510 g | Full, rich colours | Good up to ~6 m² | Fences, shopfronts, welcome banners |
| Heavy PVC | 650–700 g | Full | Very good | Very large formats, multi-year installs |
| Mesh | ~270–370 g | ~70% (perforation) | Very good (lets wind through) | Scaffolding, tall facades, stadiums |
| Blockout | ~440–510 g | Full, both sides | Good | Double-sided banners, across-the-street banners |
Finishing - eyelets, pole pockets, welded hems
The print itself isn't everything - edge finishing decides how well the installation holds up. The standard is a welded hem (folded over and heat-welded) with metal eyelets (grommets) every 50 cm. The weld reinforces the edge and prevents tearing, while the eyelets let you fix the banner with cable ties or rope.
- Eyelets every 50 cm - the standard, fine for most fence and railing banners
- Eyelets every 25–30 cm - denser spacing for large banners and windy locations
- Pole pocket (sleeve) - a folded-over edge for a pole or cable when the banner is stretched on a frame
- Corner reinforcement - an extra layer of PVC in the corners, where stress is highest
Resolution and preparing files for large-format printing
Banners are viewed from several metres away, so they don't need 300 DPI like flyers. The standard for large-format printing is 72–150 DPI at 1:1 scale (actual size). For big banners, the design is often prepared at 1:10 scale at 720–1000 DPI - once scaled up, that's equivalent to about 72–100 DPI at full size. The key rule: the further away the viewer stands, the lower the DPI you need.
| Viewing distance | Recommended DPI (1:1 scale) | Example |
|---|---|---|
| 1–3 m | 100–150 DPI | Exhibition stand banner, display roll-up |
| 3–10 m | 72–100 DPI | Fence banner, shopfront facade |
| 10–30 m | 30–50 DPI | Scaffolding mesh, large facade |
| over 30 m | 15–25 DPI | Billboard, mega-format |
Prepare the file in CMYK with the ISO Coated v2 profile, convert text to outlines, and set bleed to 0 mm for eyelet finishing (the print is trimmed to the net size) or add extra for the pocket if the banner has one. Read more about colour in print in our CMYK vs RGB article, and about bleed itself in our bleed guide.
Durability and installation
Solvent print on PVC withstands UV and water for 2–3 years outdoors without noticeable fading. Direct, all-day sunlight and heavy mechanical stress shorten its life. Mount the banner evenly tensioned - a loose one ripples and cracks at the folds sooner. Use cable ties or bungee cords (rather than rope tied rigidly at every eyelet) so the banner can flex in gusts of wind.
Frequently asked questions
PVC or mesh banner - which should I choose for a fence?
For a regular fence or railing up to about 6 m², choose 510 g PVC frontlit - it gives full coverage and the sharpest artwork. Choose mesh when the banner is large (a dozen m² or more) or mounted high and exposed to strong wind - the perforation lets gusts through and protects the fixings from tearing. For a typical construction site fence ad, PVC is the best choice.What PVC weight is best for a banner?
510 g/m² is the all-round standard: strong under eyelet tension, wind-resistant at typical sizes, yet affordable and light. 440 g is a budget option for small indoor banners, while 650–700 g is for very large formats and multi-year installations in windy locations.How many DPI should a banner print file have?
It depends on viewing distance: 100–150 DPI for banners seen from 1–3 m, 72–100 DPI from 3–10 m, and for facades and scaffolding viewed from tens of metres, 30–50 DPI is enough. Banners are printed at 1:1 or 1:10 scale - in the latter, the design is made at 720–1000 DPI, which gives proper quality at full size once scaled up.What are banner eyelets and how far apart should they be?
Eyelets (grommets) are metal rings pressed into the banner's edge, through which you thread cable ties or rope for mounting. The standard is eyelets every 50 cm on a welded, reinforced hem. For large and windy banners they're spaced closer, every 25–30 cm, so tension spreads evenly and the banner doesn't ripple.Can a banner be printed double-sided?
Yes, but use blockout - it has a black light-blocking layer so the artwork on each side doesn't show through. On standard PVC frontlit, double-sided print shows through and the image from the other side appears as a "ghost". Blockout is used for banners hung across streets and visible from two directions of traffic.How long will a banner last outdoors?
Solvent print on PVC resists water and UV for 2–3 years without noticeable colour fading. Durability depends on sun exposure, installation quality and mechanical stress. A banner that's evenly tensioned and flexibly mounted (cable ties, bungees) will outlast a loose one that ripples and cracks at the folds.How is a banner different from a sign board and a roll-up?
A banner is flexible (PVC or mesh), rolls up and needs external fixing - it's the cheapest option for a large area. A sign board is a rigid panel (forex, dibond) that stands or hangs on its own and looks better up close. A roll-up banner is a portable display system with a stand and a blockout print, set up in seconds at trade fairs and indoors.