A colour that looks great on screen often looks different once printed - paler, darker, just "off". The reason: your monitor and a printing press use completely different colour systems. A monitor uses RGB (additive light); a printer uses CMYK (subtractive pigments). In this article we explain how the two systems differ, why some colours don't exist in print, and how to set up your print file so the colour comes out the way you expect.
RGB - the additive model (light)
RGB stands for Red, Green, Blue. It's an additive model - you start from black (no light) and add coloured light to get brighter colours. R255 G255 B255 = white (full light on all three). R0 G0 B0 = black (no light). Every colour in between comes from different combinations of RGB intensity.
RGB applies wherever colour is emitted by a screen: monitors, TVs, smartphones, projectors, digital cameras. The exception is print. A printer doesn't emit light - the paper reflects or absorbs the light that falls on it. That's why print uses an entirely different model - CMYK.
CMYK - the subtractive model (pigments)
CMYK stands for Cyan, Magenta, Yellow and Key (black). It's a subtractive model - you start from white (the paper), and each ink "subtracts" part of the reflected light. Cyan absorbs red light, magenta absorbs green, yellow absorbs blue. In theory these three inks combined make black, but in practice, due to pigment imperfections, they produce a muddy brown - which is why a fourth colour is added: black (K, "key").
CMYK is used in every printing process: offset, digital, laser and inkjet. Each ink has its own percentage value - e.g. red as C0 M100 Y100 K0 (100% magenta + 100% yellow, no cyan or black). Pure black: K100. White: K0 (no ink, the colour of the paper).
Why RGB and CMYK colours look different
The RGB colour range (gamut) is wider than CMYK's. In other words, some colours a monitor can display (intense neon oranges, vivid greens, pure cyans) don't exist in CMYK. The print shop has to "round" them to the nearest available CMYK colour - which is why they come out paler and less saturated in print.
Classic colours that "don't come out" in CMYK print:
- Vivid green (e.g. Spotify green) - comes out darker with a brownish tint
- Neon orange (e.g. the Hermès logo) - comes out dull
- Pure cyan-blue (e.g. Twitter blue) - comes out with a purple tint
- Bright pink (e.g. Barbie pink) - comes out paler
- Fluorescent shades - impossible without special spot inks
ICC colour profiles - standardising CMYK
CMYK isn't uniform - different presses print "their own" CMYK depending on pigments, paper and conditions. To standardise the process, we use ICC profiles (International Color Consortium). A profile tells the press: "for this CMYK colour, use these pigment values on this paper".
| ICC profile | Use | Notes |
|---|---|---|
| ISO Coated v2 (ECI) | Coated papers (matt/gloss) | Most popular in the EU |
| ISO Coated v2 300% (ECI) | Matt coated with a 300% TIL limit | For thin papers |
| ISO Uncoated v2 (ECI) | Uncoated (offset) papers | For offset, letterhead |
| ISO Newspaper v4 | Newsprint | For newspaper inserts |
| U.S. Web Coated SWOP v2 | US standard | Rarely used in Poland |
| Coated FOGRA39 | Older European standard | Being phased out, use v2 |
In Poland the standard is ISO Coated v2 (ECI) - use it for 95% of projects. You can set the profile in Photoshop (Edit → Color Settings → Working Spaces → CMYK), Illustrator (Edit → Color Settings) and InDesign (Edit → Color Settings). A PDF/X-4 export embeds the ICC profile in the file - so the print shop knows how to interpret the colours.
How to convert a file from RGB to CMYK
In Adobe Photoshop
- Open the RGB file
- Image → Mode → CMYK Color
- Photoshop will warn you about losing colours outside the CMYK gamut
- Click OK - the image will be converted
- Check the result: View → Proof Setup → Working CMYK (live RGB vs CMYK comparison)
- Adjust colours that drifted too far "from the source" (intense greens, neons)
In Adobe Illustrator
- File → Document Color Mode → CMYK Color
- Check all vector objects - the colours will be updated
- Photos embedded in the file (embedded, not linked) are converted automatically
- For linked photos: convert them separately in Photoshop and relink
In Canva - automatic conversion
Canva works in RGB in the design area. When you export "PDF for printing", conversion to CMYK happens automatically. It's convenient, but it limits your control over the final colour. For projects with exact brand colours in PMS, we recommend Affinity Publisher or Adobe Illustrator instead of Canva.
Spot colours (PMS) - when CMYK isn't enough
PMS (Pantone Matching System) is a spot colour system - each colour is mixed as a separate ink, not as a CMYK combination. PMS is used where a brand colour must be reproduced exactly: corporate logos (e.g. Coca-Cola, IBM), safety markings (bright yellow), packaging (where colour is part of the brand's recognition).
PMS printing requires an extra plate for each spot colour - which raises the price. CMYK + 1 PMS (e.g. for the brand colour) is standard for many corporate clients. CMYK + 2 PMS (e.g. metallic gold PMS + silver PMS) is a premium option. At drukalo, PMS printing is available for runs of 500+ copies with 7 days' notice.
Rich black - a deeper black in print
Black in CMYK print comes in two versions. Standard: K100 (black ink only, 100%). It gives a flat black that looks slightly grey on large areas. Rich black: C40 M30 Y30 K100 (black + layers of CMY underneath). It gives a deep, "velvety" black.
Rules of use:
- Black text - always K100 (so thin letters stay sharp - rich black can misregister)
- Black backgrounds and large areas - rich black (deeper, more even)
- Thin black lines and frames - K100
- Black icons, logos in black - K100 (vectors stay crisp)
- Black background on a poster, brochure or cover - rich black
Soft proofing - simulating print on screen
Soft proofing is a Photoshop and Illustrator feature that shows on screen how your design will look once printed. View → Proof Setup → Working CMYK (or a specific ICC profile). Photoshop simulates the RGB → CMYK conversion and shows colours rounded to the available gamut.
Soft proofing helps you judge which colours "won't come out" in print. Turn on "Gamut Warning" (Ctrl+Shift+Y) - Photoshop highlights out-of-gamut colours in grey. This helps you decide which elements of the design to change to avoid disappointment after printing.
Monitor calibration - the foundation of reliable colour
Every monitor displays colour a little differently. Your monitor shows pink as more purple, mine shows it as pinker. Monitor calibration is the process of bringing colours to a standard (e.g. sRGB or Adobe RGB). Without calibration you can't be sure how your design "really" looks.
Hardware calibrators: Datacolor SpyderX (from 600 PLN), X-Rite i1Display (from 800 PLN). You calibrate your monitor once a month with a 5-minute measurement. For designers working with print, it's an essential investment. The free alternative is calibrating "by eye" with built-in tools (Windows Display Calibration, macOS Color Calibrator) - better than nothing, but not enough for professional work.
Frequently asked questions
Why did my vivid green come out brownish in print?
Because vivid green (e.g. R0 G255 B0 in RGB) doesn't exist in the CMYK gamut. The printer converts it to the closest available colour, which gives a dull green with a hint of brown. For a brand colour with an intense green you have two options: use a PMS spot colour (separate plate, more intense colour) or redesign the brand around a colour inside the CMYK gamut. Soft proofing in Photoshop (Ctrl+Y) shows straight away how the colour will come out.Can I leave my file in RGB and let the print shop convert it?
Yes, but you risk the print shop's conversion not being what you intended. The print shop has a standard ICC profile (usually ISO Coated v2 ECI) and converts RGB to it automatically. The result may differ from what you saw in Photoshop with an sRGB profile. It's better to convert yourself and stay in control. drukalo accepts RGB files, but during preflight we let you know the conversion will be automatic.How do I check whether a file is CMYK?
In Adobe Acrobat Reader: open the PDF → Tools → Print Production → Output Preview. Check the "Show: Process Plates" field. If all channels are CMYK - good. If you see "RGB", the file hasn't been converted. In Photoshop: Image → Mode (shows the document mode: RGB or CMYK). In Illustrator: File → Document Color Mode.What is TIL and why does it matter?
TIL (Total Ink Limit) is the maximum ink coverage on a sheet, expressed as a percentage. For offset: 300%. For digital: 240%. It's the sum of the CMYK values in a given pixel. Rich black C40 M30 Y30 K100 = 200% (safe). Full black C100 M100 Y100 K100 = 400% (unacceptable - the paper won't dry, the press will clog, smudging is likely). Always check TIL in Photoshop: View → Proof Setup → Custom → choose the profile → Preserve CMYK Numbers → turn on overprint preview.Does every monitor display CMYK the same way?
No. A monitor displays everything in RGB - it simulates CMYK during soft proofing, but only approximately. Two different monitors will show the same CMYK file in slightly different shades. That's why monitor calibration is key - a calibrated monitor shows colours closer to the actual print result. Without calibration you're working "by eye", with no certainty.Are PMS colours worth the extra cost?
For brand identity, where colour is part of who the brand is - yes. Coca-Cola, IBM and Tiffany & Co use PMS because customers instantly notice the difference between their brand colour and a similar CMYK. For generic promotional flyers - no. PMS adds 30–50% to the print price. It makes sense for premium projects and runs of 500+ copies, where the price difference is spread across the quantity.How does a print shop handle the RGB → CMYK conversion?
The print shop uses a RIP (Raster Image Processor) - software that turns the PDF into print-ready CMYK rasters. The RIP has built-in ICC profiles and converts colours automatically. At drukalo we use ColorBurst and EFI Fiery RIPs with ISO Coated v2 (ECI) as the default profile. During preflight a customer can request a different profile (e.g. ISO Uncoated v2 for offset), but for 95% of orders the default works best.