A PDF that looks good on screen isn't necessarily fit for print. A print shop expects a specific standard: correct bleed, safety margins, CMYK colour space, embedded fonts, adequate image resolution and a proper PDF/X-4 export. In this guide we go step by step through every element that decides whether your file passes preflight without corrections.
What preflight is and why it determines print quality
Preflight is an automated check of a PDF file before printing. It checks dozens of parameters: bleed, colour profiles, font embedding, image resolution, overprinting black, transparency, spot colours. A file that fails preflight goes back to the designer with a list of issues to fix. At drukalo, preflight runs automatically when you upload your file - if something's wrong, we get back to you within 2 working hours with a specific list of corrections.
A print shop that doesn't run preflight prints everything "as is" and makes the customer liable for errors in the file. The result: blurry photos, missing fonts replaced with a default font, white strips at the edges (no bleed), colours different from the screen (RGB instead of CMYK). Preflight is a pre-press standard that protects the customer from irreversible errors across the whole print run.
Bleed and safety margins - the foundation of a good PDF
What bleed is
Bleed is the area that gets trimmed off after printing. We always print on a larger sheet than the final format, then the guillotine trims the edges to the trim size. Bleed prevents white strips at the edges when the guillotine deviates slightly (typically 0.5–1 mm).
The standard in Polish printing is 3 mm of bleed on each side. A business card 85 × 55 mm + 3 mm bleed = a 91 × 61 mm file. An A5 flyer (148 × 210 mm) + 3 mm = 154 × 216 mm. An A2 poster (420 × 594 mm) + 3 mm = 426 × 600 mm. Every background element that reaches the edge must extend all the way to the end of the bleed - so that no white strip appears after trimming.
Safety margin (safe zone)
The safety margin is the inner area measured from the trim edge where no key elements should be placed: text, logos, phone numbers, QR codes. The reason: the guillotine may cut slightly more than planned, and an element too close to the edge will be cut off.
Standard safety margins: 4 mm from the trim edge for business cards and small formats, 5 mm for flyers, 7 mm for brochures (larger because of the spine), 10–20 mm for posters (larger formats = a bigger typographic buffer). Margins don't apply to graphic elements that intentionally "bleed off" - those are deliberately trimmed at the edge.
| Product | Trim size | Bleed | Safety margin |
|---|---|---|---|
| Standard business card | 85 × 55 mm | 3 mm | 4 mm |
| DL flyer | 100 × 210 mm | 3 mm | 5 mm |
| A5 flyer | 148 × 210 mm | 3 mm | 5 mm |
| A5 perfect-bound brochure | 148 × 210 mm | 3 mm | 7 mm outer / 12 mm spine |
| A2 poster | 420 × 594 mm | 3 mm | 10 mm |
| B1 poster | 707 × 1000 mm | 5 mm | 20 mm |
| Roll-up banner 85 × 200 | 850 × 2000 mm | 5 mm + 250 mm bottom | 100 mm top |
CMYK and colour profiles - why they matter
CMYK vs RGB in brief
A monitor displays colours in RGB (red, green, blue - additive light). A printer works in CMYK (cyan, magenta, yellow, black - subtractive pigments). The CMYK gamut is smaller than RGB - some intense colours (vivid greens, neon oranges, pure cyan-green) don't exist in CMYK and will be automatically converted to the nearest available colour.
A file supplied in RGB will be converted to CMYK automatically by the print shop's RIP, but the conversion may not look the way you expect. It's better to do it yourself in your design software, keeping control of the process. The standard in Polish and European print shops is the ISO Coated v2 (ECI) profile for coated papers and ISO Uncoated v2 for uncoated offset.
Rich black - a deeper black
Pure black text: K100 (C0 M0 Y0 K100). Black backgrounds and large black areas: rich black (C40 M30 Y30 K100). K100 alone on a large area looks grey and uneven, because it's only 1/4 of the ink on the sheet. Rich black gives a deep, "velvety" black by layering all four inks.
Image resolution - 300 dpi and no less
The standard image resolution for print is 300 dpi at the final size. A 1000 × 1000 pixel photo printed at 8.5 × 8.5 cm gives 300 dpi. The same photo stretched to A4 (21 × 29.7 cm) gives only about 120 dpi - noticeably blurry.
For large format (B1 and A0 posters, roll-up banners), 100–150 dpi is enough, because a poster is viewed from 1–3 metres away and a higher resolution produces a disproportionately larger file with no noticeable improvement. For business cards and flyers, 300 dpi is a must. Images from the internet (72 dpi) are only good for screens, not print - check the resolution after scaling before you start designing.
Fonts - outlined or embedded
The safe route: convert all text to curves (outlines). The file then looks identical for you and for the print operator, even if the operator doesn't have your font installed. The downside is that outlined text can no longer be edited - so prepare the file only once the copy has been approved.
The alternative: embed all fonts in the PDF. Most design software does this automatically when exporting to PDF/X-4. Check in Adobe Acrobat: File > Properties > Fonts - each should show "Embedded" or "Embedded Subset". Fonts that can't be embedded (e.g. due to licensing, or web-only fonts) may not embed - in that case, fall back to converting to outlines.
Exporting to PDF/X-4 - the pre-press standard
PDF/X-4 is a pre-press standard that guarantees a file will be interpreted identically by any print shop's RIP. It requires: embedded fonts, ICC colour profiles, flattened transparency (or live transparency that's correctly flagged), CMYK or spot colours, and no editable layers.
Adobe InDesign - the [PDF/X-4:2008] preset
In Adobe InDesign: File > Export > PDF (Print) > Adobe PDF Preset: [PDF/X-4:2008]. In the "Marks and Bleeds" section, tick "Use Document Bleed Settings" and enable "Crop Marks". In the "Output" section, choose the destination profile: ISO Coated v2 (ECI). Export.
Adobe Illustrator
In Adobe Illustrator: File > Save As > Adobe PDF > Preset: [PDF/X-4:2008]. In the "Marks and Bleeds" section, tick "Use Document Bleed Settings". Remember to set the bleed in your Illustrator document before exporting (File > Document Setup > Bleed: 3 mm).
Canva, Affinity Publisher, Figma
Canva: on Pro/Teams plans you get the "PDF for printing" export with the "Crop marks and bleed" option. Affinity Publisher: File > Export > PDF (Press) > PDF/X-4 preset. Figma: unfortunately has no native PDF/X-4 export - export to PDF, then convert in Adobe Acrobat, or use Figma only for mock-ups and prepare the final file in Illustrator.
| Error | What happens | How to fix it |
|---|---|---|
| No bleed | White strips at the edges after trimming | Add 3 mm of bleed in the document settings |
| File in RGB | Colours different from the screen | Convert to CMYK before exporting |
| Photos <300 dpi | Blurry, pixelated prints | Replace photos with higher-resolution versions |
| Fonts not embedded | The print shop will substitute a default font | Convert to outlines or embed the fonts |
| Pure K100 on large areas | Grey, uneven black | Use rich black: C40 M30 Y30 K100 |
| Unflattened transparency | Unpredictable rendering in the RIP | Flatten on export or use PDF/X-4 |
Checklist before uploading your file to the print shop
- The document size includes 3 mm of bleed on each side
- Safety margins from the trim edge: 4 mm for small formats, 10+ mm for large format
- All elements in CMYK, ISO Coated v2 (ECI) profile
- Photos at 300 dpi at print scale (or 100–150 dpi for large format)
- Fonts outlined or embedded in the PDF
- Black backgrounds: rich black (C40 M30 Y30 K100), not K100 alone
- Export to PDF/X-4 from the preset, not experimental settings
- Check in Adobe Reader: file properties, output preview, bleed preview
Frequently asked questions
Is a PDF from Canva suitable for print?
Yes, if you use Canva Pro or Teams and export via "PDF for printing" with the "Crop marks and bleed" option. Canva Free exports PDFs without bleed and often in RGB - such a file needs manual conversion in Adobe Acrobat before you upload it to a print shop. For professional printing, we recommend Affinity Publisher (one-off purchase, 250 PLN) or Adobe InDesign (subscription) instead of Canva.Which colour profile should I choose for printing in Poland?
For coated papers (matt and gloss coated): ISO Coated v2 (ECI) - the European standard. For offset and uncoated papers: ISO Uncoated v2 (ECI). For newsprint: ISO Newspaper v4. Most Polish print shops use these profiles by default. If you don't know which profile your print shop uses, ask before exporting - but ISO Coated v2 (ECI) is a safe choice for 95% of orders.What should I do if my file is too large to upload?
First check the image resolution - files are often bloated by 600 dpi photos where 300 dpi would do. In Adobe Acrobat: File > Save As > Reduced Size PDF or File > Save As > Optimized PDF (with the "Standard" preset). The file can shrink 5–10× with no visible loss of quality. An A0 poster should weigh no more than 100–150 MB.Can I send a JPG instead of a PDF?
Technically yes - some print shops accept JPGs for simple jobs (single-sided posters, vinyl). But JPG doesn't support bleed, colour profiles, transparency or vector fonts - everything is flattened to pixels. A PDF/X-4 file gives you more control over quality and less risk of surprises. drukalo accepts PDFs, and JPGs too (with caveats).Can I use transparency in a print file?
Yes, but flatten transparency on export or use PDF/X-4 (which supports transparency natively). Older print shops with RIPs based on PostScript Level 2 may struggle with unflattened transparency. PDF/X-1a (the older standard) forces flattening. PDF/X-4 (newer, our standard) preserves transparency. Check with your print shop which preset they prefer.How much does it cost to have the print shop prepare the file?
At drukalo, preflight is free - we check your file and come back with a list of corrections if something's wrong. Fixing minor errors (e.g. missing bleed, a file in RGB) costs about 30–80 PLN net per hour of DTP work. Full design preparation from scratch is a different service - 200–800 PLN for a flyer or business card, depending on complexity. drukalo doesn't offer DTP services, but we can recommend freelancers from our network.Can I send a PSD or AI file instead of a PDF?
PSD (Photoshop) and AI (Illustrator) are working formats - the print shop has to open them in its own software, which creates a risk that they look different for the operator than for you. The exchange standard is PDF/X-4 - independent of any design software. If you send PSD/AI files, the risk of errors is on your side. Stick to PDF.