drukalo
Print-ready files6 min read2 August 2026

Print resolution - how many DPI do you need (300 DPI and beyond)

How many DPI should a print file have? We explain the difference between DPI and PPI, why 300 DPI is the standard, when less is enough (posters, banners), how to convert pixels to centimetres and why you can't "add" resolution after the fact. A practical guide with conversion tables.

resolutionDPIPPIprint-ready PDFphoto resolution

"Your file's resolution is too low" is one of the most common messages customers get from a print shop. Resolution decides whether a print comes out sharp or "pixelated". In this guide we explain what DPI is, why 300 DPI is the print standard, when you can safely go lower, how to convert pixels to centimetres and why resolution can't be recovered - a photo that's too small for print stays too small, whatever number your software shows.

DPI vs PPI - what's the difference

DPI (dots per inch) is the number of ink dots per inch that a printing press lays down. PPI (pixels per inch) is the number of image pixels per inch in a digital file. In DTP practice the two terms are used interchangeably - people say "300 DPI" about a file, even though technically a file has PPI and a press has DPI. For a designer, one thing matters: how many image pixels fall on each inch (2.54 cm) of the print at its final size.

The key rule: resolution only makes sense together with size. A 3000 × 2000 pixel photo gives an excellent 300 DPI at 25 × 17 cm, but a poor 75 DPI when blown up to a 100 × 67 cm poster. Same number of pixels, different result - because they've been stretched over a larger area.

Why 300 DPI is the standard

300 DPI is the standard for print viewed up close (flyers, business cards, catalogues, books), because from ~30 cm the human eye can't distinguish detail finer than roughly 300 dots per inch. Above 300 DPI you see no further improvement - extra pixels just make the file bigger. Below 300 DPI you start to notice "softness", and at much lower values, pixelation and jagged edges.

When less than 300 DPI is enough

The further the viewer stands from the print, the lower the resolution you need - from further away the eye can't make out fine dots anyway. A poster viewed from 2 m doesn't need 300 DPI, and a building banner seen from 20 m is fine at 30–50 DPI. Forcing 300 DPI on a large format would produce a file of many gigabytes with no visible benefit.

ProductViewing distanceRecommended DPI
Business cards, flyers, catalogues25–40 cm300 DPI
Stickers, labels20–40 cm300 DPI
Posters A3–A11–2 m150–200 DPI
Large-format B1 posters2–3 m120–150 DPI
Exhibition roll-up banner1–3 m100–150 DPI
Fence banner3–10 m72–100 DPI
Building banner / mesh10–30 m30–50 DPI
Recommended resolution by product type and viewing distance

How to convert pixels to centimetres

To check whether a photo can be printed at a given size, use the formula: size in inches × DPI = pixels needed. Since 1 inch = 2.54 cm, divide the size in centimetres by 2.54, then multiply by the DPI. Example for an A5 flyer (14.8 × 21 cm) at 300 DPI: 14.8 / 2.54 × 300 ≈ 1748 px and 21 / 2.54 × 300 ≈ 2480 px. The photo must be at least 1748 × 2480 pixels.

FormatSize (mm)Minimum pixels (300 DPI)
Business card85 × 551004 × 650 px
A6105 × 1481240 × 1748 px
A5148 × 2101748 × 2480 px
A4210 × 2972480 × 3508 px
A3297 × 4203508 × 4961 px
A2 (at 200 DPI)420 × 5943307 × 4677 px
Minimum pixel dimensions for popular formats at 300 DPI

Why you can't "add" resolution

This is the most important thing to remember: resolution can't be recovered. An 800 × 600 px photo contains only that much image information, and there's no way to extract detail that was never captured. Changing the DPI from 72 to 300 without resampling does NOT add pixels - it just tells the press to print the same image smaller. Physically: fewer centimetres, the same number of pixels.

Upsampling (resample) in Photoshop adds pixels by interpolation - the software "guesses" the in-between values. The result is soft and artificial, and at large enlargements actively harmful. AI tools (Super Resolution, Preserve Details 2.0) do better than classic interpolation and can rescue a slightly undersized photo, but they can't replace a high-resolution original.

Compression, file format and quality

Pixel count isn't everything - heavy JPG compression ruins quality regardless of resolution. A heavily compressed JPG has "artefacts": blocky distortion around edges and text, and banding in tonal transitions. For print, use JPG at maximum quality (12/12) or lossless formats: TIFF, PNG (for graphics with transparency) or PDF with embedded full-quality images.

  • TIFF - lossless, best for high-quality photos and archiving
  • PDF/X-4 - the target print format, with embedded images and profiles
  • PNG - good for graphics with transparency and sharp edges
  • JPG at quality 12/12 - acceptable when file size matters
  • Avoid: low-quality JPGs, images from the web, screenshots

Frequently asked questions

  • How many DPI should a print file have?
    For print viewed up close (business cards, flyers, catalogues, books) the standard is 300 DPI at final size. For posters viewed from 1–2 m, 150–200 DPI is enough; for roll-up banners 100–150 DPI; and for large-format banners seen from several to a dozen-plus metres, even 30–72 DPI. The further away the viewer, the fewer DPI you need.
  • What's the difference between DPI and PPI?
    PPI (pixels per inch) is the number of image pixels per inch in a digital file, while DPI (dots per inch) is the number of ink dots per inch a press lays down. In DTP the terms are used interchangeably - saying "300 DPI" about a file means 300 pixels per inch of print. What matters to a designer is the ratio: how many image pixels fall on each centimetre of the final print.
  • Can I change a photo's resolution from 72 to 300 DPI?
    Just changing the DPI number without resampling doesn't add pixels - the photo keeps the same amount of information and simply prints smaller. Enlarging with resampling (upsampling) adds pixels by interpolation, but the result is soft and artificial. Resolution can't really be recovered - you need a higher-resolution original.
  • How do I check whether a photo is good enough for a given format?
    Use the formula: (size in cm / 2.54) × 300 = pixels needed. For example, A4 (21 × 29.7 cm) at 300 DPI needs about 2480 × 3508 pixels. In Photoshop open Image → Image Size, untick "Resample", enter the target size in cm and check the resulting DPI. If it falls below the recommended value, the photo is too small.
  • Why did a photo from the internet come out blurry in print?
    Images from websites, social media and Google Images are usually 72 DPI and a few hundred pixels wide - enough for a screen, but too little for print. Printed at real size, they come out blurry and pixelated. For print you need original files at full resolution, and ideally your logo and graphics in vector format.
  • Do vector graphics have a resolution?
    No. Vector graphics (logos, text, shapes created in Illustrator or CorelDRAW) are described mathematically and scale to any size without losing quality - they have no DPI. That's why logos and graphic elements are best kept as vectors (AI, EPS, PDF, SVG); the 300 DPI rule applies only to raster images, i.e. photos and bitmaps.
  • Which file format gives the best print quality?
    For final print, PDF/X-4 with embedded full-quality images and colour profiles is best. For individual photos, lossless TIFF keeps full quality, and PNG works well for graphics with transparency and sharp edges. Only use JPG at maximum quality (12/12), because heavy compression creates artefacts regardless of resolution.

Related products

Order the products from this article

Read more in “Print-ready files”