drukalo
Guides8 min read5 August 2026

QR codes on flyers and business cards - how to design them so they work

A step-by-step guide to preparing a QR code for print on a flyer, business card or poster. Minimum size, quiet zone, contrast, dynamic vs static codes, error correction level and the most common reasons a QR code won't scan after printing.

QR codebusiness cardsflyerscall to actionprint marketing

A QR code is a bridge between print and the digital world - on a business card it leads to a digital card, on a flyer to an offer page, on a poster to an event sign-up. But a QR code only works if it's properly designed for print: too small, too little contrast or no margin, and it won't scan - all that effort wasted. In this guide we show you, step by step, how to prepare a QR code that scans every single time.

How a QR code works and what breaks it in print

A QR (Quick Response) code is a two-dimensional graphic code that a smartphone camera reads and converts into data - most often a URL. It's made up of black and white modules (little squares) and three distinctive position markers in the corners. The camera recognises the pattern thanks to the contrast between the modules. Anything that reduces that contrast or sharpness - too small a size, weak colour contrast, no margin, blurry printing - makes scanning harder or impossible.

Static vs dynamic codes

Before you generate a code, choose its type. A static code has the address permanently encoded in its structure - it can't be changed after printing and it doesn't collect statistics. A dynamic code goes through an intermediate redirect link, so the destination address can be changed after printing, and the system counts scans (how many people, when, from which city).

FeatureStaticDynamic
Changing the address after printingImpossiblePossible at any time
Scan statisticsNoneYes (count, time, location)
Code complexity (modules)Depends on URL lengthAlways low (short intermediate link)
CostFreeUsually a subscription / account
Use caseFixed address, one-off campaignMeasured campaigns, changing content
Static vs dynamic QR code

How to prepare a QR code for print - step by step

  1. Choose the code type (static or dynamic) and paste in the destination URL
  2. Generate the code in a VECTOR format (SVG or EPS) - not PNG/JPG - so it scales without pixelation
  3. Set the error correction level - Q (25%) or H (30%) is recommended for print
  4. Keep a quiet zone (margin) of at least 4 modules around the code
  5. Pick the size: at least 2 × 2 cm on a business card, 2.5–3 cm on a flyer
  6. Ensure strong contrast: dark code on a light background, never the other way round without testing
  7. Place the code as a vector in a CMYK layout and print black as K100
  8. Test the printed code with several phones before ordering the full run

Minimum QR code size

Size is the most common reason codes don't work. A simple rule based on scanning distance applies: the minimum side of the code is roughly 1/10 of the distance it will be scanned from. A code scanned at arm's length (about 25–30 cm) needs a side of about 2.5–3 cm. A code on a poster scanned from 2 m needs about 20 cm.

MediumScanning distanceMinimum code side
Business card20–30 cm2.0 × 2.0 cm
Flyer, folder25–35 cm2.5 × 2.5 cm
Catalogue, menu25–40 cm2.5 × 3.0 cm
A2–A1 poster1–2 m10–20 cm
Roll-up banner, banner2–4 m20–40 cm
Sign / shop window3–5 m30–50 cm
Minimum QR code size by medium and scanning distance

Quiet zone and contrast - the two most overlooked elements

Quiet zone

The quiet zone is an empty, light margin around the code - essential so the camera can separate the code from its surroundings. The standard is at least 4 modules wide (i.e. 4 of the code's "little squares") on every side. If the code touches text, graphics or an edge, the scanner may not detect it. Never fill the quiet zone with a pattern or place the code right next to the bleed.

Contrast and colour

The camera needs clear contrast between the modules and the background. The safest option: a dark code on a light background. You can give the code your brand colour, but it must be dark (ideally at least about 40% darker than the background; navy, dark green and burgundy work well in practice). An inverted code (light on dark) can be problematic - many scanners expect dark modules on a light background. If you make a negative code, be sure to test the print.

  • Safe: K100 black on a white background
  • OK: a dark brand colour on a light, solid background
  • Risky: a code on a photo or gradient (variable contrast)
  • Risky: a light code on a dark background (negative) - needs testing
  • Won't work: low contrast (e.g. grey on light grey), a code on a pattern

Error correction level

QR codes have built-in error correction (Reed–Solomon) - they can still be read even if part of the code is damaged or covered. There are four levels: L (recovers ~7% of data), M (~15%), Q (~25%) and H (~30%). A higher level means the code works even when dirty or with a logo in the middle, but it has more modules (it's denser). For print we recommend Q or H, especially if you put a logo in the centre of the code - then H is a must, because the logo covers some of the modules.

Why a QR code won't scan after printing

Symptom / causeFix
Code too small (< 2 cm on a business card)Enlarge to at least 2 cm, shorten the URL or use a dynamic code
No quiet zone (code touches text)Add a margin of at least 4 modules all round
Contrast too lowDark code on a light background, black as K100
Code on a photo / gradientMove it onto a solid, light background
Placed as a small PNG (pixelation)Use the vector version (SVG/EPS)
Logo covers too many modulesSet correction to H, shrink the logo to ~25%
Blurry print / ink spreadPrint K100 on coated paper, test it
The most common reasons QR codes fail and how to fix them

Add a call to action next to the code

A QR code on its own doesn't say why anyone should scan it. Always add a short call to action next to it: "Scan to see the offer", "Sign up for our newsletter", "Download the menu", "Book an appointment". A specific promise multiplies the number of scans compared with a bare code. On a business card, add a note by the code saying where it leads (e.g. "portfolio" or "digital business card").

Frequently asked questions

  • What is the minimum size of a QR code on a business card?
    At least 2 × 2 cm. Below that size the modules become too fine for a camera to distinguish at arm's length, especially on uncoated paper, where the ink spreads slightly. To fit the code into 2 cm and keep it legible, use a short URL or a dynamic code with a short intermediate link.
  • Why won't my QR code scan after printing?
    The most common causes are: the code is too small, there's no margin (quiet zone), the contrast is too weak, the code sits on a photo or gradient, it was placed as a small, pixelated PNG, or a logo covers too many modules. Check them one by one: enlarge the code, add a margin of at least 4 modules, use a dark vector code on a light background and test the print on several phones.
  • What's the difference between a static and a dynamic QR code?
    A static code has the address permanently encoded - it can't be changed after printing and it doesn't collect statistics. A dynamic code goes through an intermediate link, so the destination can be changed at any time and the system counts scans (how many, when, from where). For long-lived materials and measured campaigns, dynamic is better; for a one-off flyer with a fixed address, static is enough.
  • Which error correction level should I choose for print?
    For print, level Q (recovers ~25% of data) or H (~30%) is recommended. Higher correction means the code can still be read even if it's slightly dirty or partly covered. If you put a logo in the centre of the code, you must choose H, because the logo covers some of the modules - at a lower level the code will stop working.
  • Can a QR code be in my brand colour?
    Yes, but it must keep strong contrast with the background. The safest choice is a dark code colour (navy, dark green, burgundy) on a light, solid background. Avoid a light code on a dark background (negative) - many scanners expect dark modules on a light background and may fail to read it. Always test any coloured or inverted code in print.
  • What format should I use to place a QR code in my design?
    A vector format - SVG or EPS - so the code scales to any size without pixelation and has perfectly crisp module edges. Placed as a small PNG or JPG file, it becomes blurry when enlarged and stops scanning. In your layout, set the code in CMYK and print the black modules as pure K100 black for maximum sharpness.
  • What is the quiet zone in a QR code?
    The quiet zone is the empty, light area around the code, needed so the camera can separate the code from its surroundings. The standard is at least 4 modules (four of the code's "little squares") on every side. If the code touches text, graphics or the edge of the material, the scanner may not detect it - so never place the code right next to the bleed or fill the margin with a pattern.

Related products

Order the products from this article

Read more in “Guides”