There are at least four ways to print a T-shirt - and each gives a different result, ages differently and adds up differently in your budget. DTG shines for small runs and photos, screen printing wins on a thousand identical shirts, flex is unbeatable for one-off lettering, and sublimation rules on polyester. In this article we compare all four methods: how they work, what they cost at different quantities, their colour limitations and which fabrics they work on at all. By the end you'll know which method suits your project - and if you go for DTG, our guide on how to prepare a T-shirt print will walk you through preparing the file. Looking for T-shirt printing in Poland? Start here.
How each method works
DTG (Direct To Garment) is digital printing straight onto fabric - the printer lays pigment inks onto cotton much like an office printer on paper, only more precisely and durably. There are no screens or plates: the artwork file goes from the computer straight onto the shirt. This means DTG prints full colour (4/0) with no surcharge per colour and is cost-effective from a single piece. This is the technology we use at drukalo: a white 100% cotton T-shirt, 180 g/m², with a print up to A4 size (21×29 cm) on the front, 124.11 PLN for 1 piece and 97.44 PLN/pc at 100 pieces.
Screen printing is the industrial classic: ink is pushed through a mesh screen (stencil) onto the fabric, separately for each colour. Preparing the screens costs money - usually 80–150 PLN per colour - but once the screens exist, every further shirt comes off the line fast and cheap. Flex and flock are heat transfer from vinyl: a plotter cuts a shape out of coloured film, which is then heat-pressed into the fabric. Flex is smooth and slightly glossy; flock has a velvety, suede-like texture. Sublimation works the opposite way to all the others: under heat, the dye turns into gas and permanently penetrates the fibres - but only polyester, and only on a light base.
Comparison table: DTG vs screen printing vs flex/flock vs sublimation
Before we get into the details, take a look at all four methods side by side in one table. We compare them across ten dimensions that really drive the choice: from the minimum cost-effective quantity, through setup costs and unit price at different volumes, to fabric type, the feel of the print (hand) and wash durability. No method wins in every category - which is exactly why all four still coexist on the market. The table will help you quickly rule out methods that don't fit your project, and the sections below explain each row in more detail.
| Feature | DTG | Screen printing | Flex / flock | Sublimation |
|---|---|---|---|---|
| Minimum cost-effective quantity | From 1 pc | From approx. 30–50 pcs | From 1 pc | From 1 pc |
| Number of colours | Unlimited (full colour) | Each colour = separate screen | 1–3 (each colour = separate film) | Unlimited (full colour) |
| Photos and gradients | Yes - best quality | Difficult (halftone, costs) | No | Yes |
| Fabric | Cotton (ideally 100%) | Cotton, blends | Most fabrics | Polyester only, light-coloured |
| Setup cost | None | 80–150 PLN per colour (screens) | Low (film cutting) | None |
| Unit cost at 1 pc | Low | Very high | Low | Low |
| Unit cost at 500 pcs | Medium | Lowest | High (manual work) | Medium |
| Print hand (thickness) | Thin, "soaked in" | Noticeable ink layer | Distinct film layer | Zero - dye inside the fibre |
| Wash durability | High (wash at 30–40°C) | Very high | High, film can crack | Highest |
| Turnaround for small orders | Short (production 24–48 h with us) | Long (screen preparation) | Short | Short |
Quantity decides: when each method pays off
The most important variable when choosing a method is quantity. With screen printing you pay for screen setup whether you print 10 shirts or 1,000 - for a three-colour design that's 240–450 PLN of setup alone before the first shirt exists. At 10 pieces, setup adds 24–45 PLN to every shirt. At 1,000 pieces the same cost spreads to 24–45 groszy (Polish cents) per shirt - and that's when screen printing becomes unbeatable on price. DTG needs no screens, so you don't pay for setting them up, and the unit price falls gently with quantity: at drukalo 124.11 PLN for 1 shirt and 97.44 PLN at 100.
The break-even point usually lies between 30 and 100 pieces - depending on the number of colours in the design. A single-colour design (one screen) starts paying off in screen printing sooner; a full-colour design with gradients may never be cheaper on screen, because it needs halftoning and many screens. Rule of thumb: up to about 50 pieces or for multi-colour artwork - DTG; over 100–200 identical shirts with simple 1–3-colour artwork - screen printing; in between - price up both. For company orders with mixed sizes and small quantities, DTG has one more advantage: no minimum order, which we cover in more detail in our article on branded company T-shirts.
Number of colours and type of artwork
The second variable is the artwork itself. DTG and sublimation print full colour with no surcharges - a photo, an illustration with a hundred shades and simple lettering all cost exactly the same. Screen printing is priced per colour: a three-colour logo means three screens, three setups and three passes of the press. Photorealistic artwork in screen printing needs simulated CMYK halftoning - that's expensive and only makes sense for very large runs. Flex and flock don't actually print at all: the film is one solid colour, so the method suits lettering, numbers and simple logos, but not illustrations.
- Photo, gradient, multi-colour illustration → DTG (on cotton) or sublimation (on polyester)
- Simple 1–3-colour logo, large run → screen printing
- One-off lettering, a number on a sports shirt, name personalisation → flex
- A velvety, raised texture effect (e.g. a retro logo) → flock
- A small run of anything full-colour → DTG, no question
Fabric matters: cotton vs polyester
You can't choose a method without considering the fabric. DTG works best on 100% cotton - pigment inks bond with natural fibres, and the higher the cotton content, the cleaner the colour and the better the durability. Our T-shirt is exactly that: 100% cotton at 180 g/m² - dense enough to give the print an even, stable base, yet breathable for everyday wear. Sublimation is the mirror opposite: sublimation dye bonds only with polyester and will wash out of cotton after a few washes. Sublimation also needs a light (ideally white) base, because the dye is transparent.
Screen printing and flex are the most versatile in terms of fabric - plastisol inks and heat-transfer films stick to cotton, blends and polyester. But bear in mind the difference in feel: screen printing leaves a noticeable ink layer, flex a distinct film "sticker", while DTG soaks into the fabric and after a few washes is barely noticeable. If you want a soft, breathable print on cotton, DTG has no competition. The same rules apply to other cotton textiles - such as bags, which we cover in our guide to printed canvas tote bags.
What to choose? A quick decision cheat sheet
If you've made it this far and are still undecided, here's the whole article in three questions. First: how many pieces? Under 50 - DTG (or flex for simple lettering). Over 200 identical - price up screen printing. Second: what artwork? Full colour, photo, gradient - DTG. A one- or two-colour logo on a large run - screen printing. Third: what fabric? Cotton - DTG or screen printing; technical polyester (sports shirts) - sublimation. For most projects that come to an online print shop - single T-shirts, gifts, small company batches, design tests before bigger production - DTG is simply the most sensible choice: zero setup costs, full colour and a short turnaround.
There's one more scenario worth mentioning: testing a design before large-scale production. Even if you're ultimately planning 500 screen-printed shirts, print one or two in DTG first. For 124.11 PLN (221.28 PLN for two) you'll see the artwork on real fabric, check the print proportions on a body and show a physical sample to the decision-makers - before you invest in screens. The same approach works for designs on other cotton textiles, such as bags, which we cover in a separate design guide.
| Scenario | Recommended method | Why |
|---|---|---|
| 1 T-shirt as a gift (photo, artwork) | DTG | Full colour from 1 pc, no setup costs |
| 15 T-shirts for a hen party | DTG | Small run, each piece can be personalised |
| 30 company T-shirts with a colour logo | DTG | Mixed sizes, full colour, fast turnaround |
| 500 festival T-shirts, 2-colour logo | Screen printing | Screen costs spread over the run - lowest price per piece |
| Sports shirts with numbers | Flex | Individual numbers and names, durable film |
| Technical running shirts (polyester) | Sublimation | The only durable method on polyester, full colour |
Frequently asked questions
Is a DTG print durable?
Yes. Pigment inks bond with cotton fibres and survive dozens of washes - as long as you wash inside out at up to 30–40°C. DTG doesn't crack or peel like film, because it isn't a layer stuck onto the fabric but ink that soaks into its structure.Why is DTG more expensive than screen printing for large runs?
Because every DTG shirt goes through a full digital print cycle - machine time is the same for each piece. With screen printing, once the screens are ready, printing the next shirt takes seconds. Across hundreds of identical pieces, the screen costs are spread out and screen printing wins on price.Can DTG print a photo on a T-shirt?
Yes - that's this method's greatest strength. DTG prints full colour with gradients and photographic detail at no extra cost. Just take care of the file: 300 dpi at the final size, ideally PNG. You'll find the details in our guide to preparing a T-shirt print.What is the minimum number of T-shirts for DTG printing?
One piece. DTG needs no screens or prepress setup, so there's no minimum order. At drukalo you can order a single T-shirt for 124.11 PLN (in any size): production 24–48 h, delivery in about 1 business day.Can DTG print on a black T-shirt?
Technically, DTG prints on dark fabrics using a white underbase, but this needs an extra pass of the machine and pretreatment. In our range we print on white 100% cotton T-shirts - the white base gives the cleanest colours in 4/0 mode and the best price.What does "4/0 print" mean?
It's printing-industry shorthand: 4 colours (full CMYK) on one side, 0 on the other. For a T-shirt: a full-colour print on the front, no print on the back.Which method gives the softest print?
Sublimation (the dye penetrates the fibre, no layer at all), but it only works on polyester. On cotton, DTG is the softest - the ink soaks into the fabric and after a few washes is barely noticeable. Screen printing and flex leave a noticeable layer on the surface.